cx18:  Start initialization, version 1.0.4
cx18-0: Initializing card #0
cx18-0: Autodetected Hauppauge card
cx18-0 info: base addr: 0xf8000000
cx18-0 info: Enabling pci device
ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 20 (level, low) -> IRQ 233
cx18-0: Unreasonably low latency timer, setting to 64 (was 32)
cx18-0 info: cx23418 (rev 0) at 03:06.0, irq: 233, latency: 64, memory: 0xf8000000
cx18-0 info: attempting ioremap at 0xf8000000 len 0x04000000
cx18-0: cx23418 revision 01010000 (B)
cx18-0 info: GPIO initial dir: 0000ffff/0000ffff out: 00000000/00000000
cx18-0 info: activating i2c...
cx18-0 i2c: i2c init
tvaudio' 2-004c: tea6420 found @ 0x98 (cx18 i2c driver #0-0)
cx18-0 i2c: i2c client attach
tuner' 3-0043: chip found @ 0x86 (cx18 i2c driver #0-1)
tda9887 3-0043: creating new instance
tda9887 3-0043: tda988[5/6/7] found
cx18-0 i2c: i2c client attach
tuner' 3-0061: chip found @ 0xc2 (cx18 i2c driver #0-1)
cx18-0 i2c: i2c client attach
cx18-0 info: Active card count: 1.
tveeprom 2-0050: Hauppauge model 74541, rev C6B6, serial# 5210675
tveeprom 2-0050: MAC address is 00-0D-FE-4F-82-33
tveeprom 2-0050: tuner model is Philips FM1236 MK5 (idx 116, type 43)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX23418 (idx 38)
tveeprom 2-0050: decoder processor is CX23418 (idx 31)
tveeprom 2-0050: has radio
cx18-0: Autodetected Hauppauge HVR-1600
cx18-0 info: NTSC tuner detected
cx18-0: Raw VBI supported; Sliced VBI is not yet supported
cx18-0 info: Loaded module tuner
cx18-0 info: Loaded module cs5345
tuner-simple 3-0061: creating new instance
tuner-simple 3-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
cx18-0 info: Allocate encoder MPEG stream: 64 x 32768 buffers (2048kB total)
cx18-0 info: Allocate TS stream: 32 x 32768 buffers (1024kB total)
cx18-0 info: Allocate encoder YUV stream: 16 x 131072 buffers (2048kB total)
cx18-0 info: Allocate encoder VBI stream: 60 x 17328 buffers (1015kB total)
cx18-0 info: Allocate encoder PCM audio stream: 256 x 4096 buffers (1024kB total)
cx18-0 info: Allocate encoder IDX stream: 32 x 32768 buffers (1024kB total)
cx18-0: Registered device video1 for encoder MPEG (64 x 32 kB)
DVB: registering new adapter (cx18)
MXL5005S: Attached at address 0x63
DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB Frontend)...
cx18-0: DVB Frontend registered
cx18-0: Registered DVB adapter0 for TS (32 x 32 kB)
cx18-0: Registered device video33 for encoder YUV (16 x 128 kB)
cx18-0: Registered device vbi1 for encoder VBI (60 x 17328 bytes)
cx18-0: Registered device video25 for encoder PCM audio (256 x 4 kB)
cx18-0: Registered device radio1 for encoder radio
cx18-0: Initialized card #0: Hauppauge HVR-1600
cx18:  End initialization